The single most expensive mistake on a truck carpet order is picking the wrong transmission tunnel, because molded carpet cannot be reshaped once it arrives. Spend five minutes with the checks on this page and you will order the right ACC kit the first time, shipped free.
A replacement truck carpet is one of the best values in a restoration: a couple hundred dollars turns a tired cab into one that looks new. The catch is that trucks of the same year can have two different floors. Get the floor right and the carpet drops in like it came from the factory. Get it wrong and you are paying return shipping on a bulky box and waiting on a second one.
The two floors
Low tunnel (low hump): the tunnel is part of the stamped floor and sits fairly low. Most 2WD trucks with an automatic or a column-shifted three-speed have this floor.
High tunnel (high hump): the tunnel is taller to make room for a floor-shifted four-speed or a 4WD transfer case. Most 4WD trucks and 2WD trucks with a floor-shifted four-speed have this floor.
Those are the patterns, not guarantees. Older trucks have often had cabs swapped or transmissions converted, and a few factory combinations, such as some early 1970s Ford C6 automatics and some GM TH400 trucks, do not follow the usual rule. Always buy carpet for the floor that is in the cab now.
The five-minute check
- Pull up a corner of the old carpet at the tunnel or look up from under the cab.
- Look for bolts. On most 1967 to 1972 GM trucks and 1967 to 1979 Ford trucks, a high tunnel is a separate cover bolted to the floor. No bolts and a smooth stamped floor usually means low tunnel.
- On 1984 to 1987 GM trucks, the high tunnel is welded in, so measure instead. Roughly 4 inches tall at the center means low, closer to 6 inches means high.
- Check for a transfer case lever. If one comes through the floor, order the 4WD high tunnel carpet.
- Confirm your cab style (regular, extended or crew) and, on 1967 to 1972 GM trucks, whether the fuel tank is still behind the seat.
Newer trucks
Many ACC carpets for 1988 and newer trucks fit both 2WD and 4WD. They arrive without the shifter or transfer case openings cut, so you trim them during install. Cut a small X, test the fit, and enlarge a little at a time.
Why it pays to check first
Every ACC carpet is molded to order. Returns are accepted within 30 days, but the buyer pays return shipping, and a truck carpet is a large, heavy box. Checking your floor before ordering is the easiest way to keep the free shipping you started with as the only shipping you pay for.
Not sure which carpet to choose?
Aren't sure which carpet to choose? Email us a photo of the tunnel with your year, cab and transmission, and we'll show you the right carpet before you order. Email us a photo.
Quick answers
Is 4WD always high tunnel?
Almost always. The main exception is a 4WD truck that has had a 2WD cab installed.
Is automatic always low tunnel?
On most 2WD trucks, yes. Some older Fords with a C6 and some GM trucks with a TH400 or big block are exceptions, so check the floor on those.
What does "fits 2WD and 4WD" mean on a listing?
One carpet is molded to fit both floors, and you cut the shifter or transfer case opening yourself during install.
Does shipping cost extra?
No. ACC carpet ships free from Madison Motor Parts.