Timbren DRTT1500 Ses Suspension Enhancement System Rr Kit for 2009-2021 Ram1500

This SES Suspension Upgrade fits the rear suspension of a Ram 1500 pickup truck.

Each laser cut piece of steel is powder-coated to ensure a quality fit.

We’ve engineered our hollow rubber springs to deliver a progressive spring rate.

In other words, the more weight that pushes down on the rubber springs the harder they work to prevent rear end sag.

Whether you’re pulling a trailer or carrying a heavy load in the bed of your truck, our hollow rubber springs adjust automatically to keep the vehicle level at all times.

This SES Suspension Upgrade replaces the jounce stop on the frame.

Its unique design ensures superb ride quality – loaded or unloaded.

(There should be a ½” to 1 ½” gap between rubber spring and frame to ensure unloaded ride quality.

) Unlike other auxiliary spring systems, the SES Suspension Upgrade guarantees the best of both worlds.

We recommend Severe Service kits be used with a slide-in camper or salt spreader.

In fact, any application that requires maximum stability (reducing roll and sway) calls for a Severe Service upgrade.

(Click here for more info on Severe Service recommendations)

DRTT1500 replaces the bumpstops on the rear suspension of the 2009-2020 RAM 1500 2WD and 4WD pickup truck models.

This kit is rated at 7000 lbs capacity.

Even though you’re increasing the spring rate by adding this upgrade, this does not increase the GVWR (Gross Vehicle Weight Rating).

Please make sure that the load does not exceed the GVWR set by the manufacturer.