Synergy 8875-01 Adjustable Front Track Bar for 18-20 Jeep Wrangler JL

Description

Jeep Wrangler JL / JLU / JT Heavy Duty Adjustable Front Track Bar.

Adjustable track bars are used to help center your axles when running a suspension lift.

This track bar also significantly improves lateral stiffness over stock, and is seen as a required upgrade to eliminate the factory track bar from contributing to steering shimmy or death wobble, even on stock vehicles.

Considerably stronger than stock to hold up to the abuse of large tires and aggressive off road driving.

Length is adjustable on the vehicle to make adjustments a breeze.

Uses maintenance free Synergy Dual Durometer Bushings on both ends.

Bent to clear the Synergy Sector Shaft Brace and most aftermarket differential covers.

Pair with Synergy's Drag Link, Tie Rod, and Sector Shaft Brace to bullet-proof your steering and guarantee product compatibility from stock height to 3 plus inches of lift.

Fits:

2018+ Jeep Wrangler JL / JLU

2020+ Jeep Gladiator JT

Benefits:

Eliminates the track bar from contributing to steering shimmy or death wobble

Allows centering of front axle when running a suspension lift

Adjustable without removing from vehicle

Maintenance Free, no greasing required

Synergy Dual Durometer Bushings eliminate binding issues associated with stock vulcanized bushings

No jam nuts that are impossible to keep tight

No modifications required to install

Isolates Noise, Vibration, and Harshness (NVH) increasing ride quality

Compatible with Synergy HD Steering and Sector Shaft Brace

Bent to clear most aftermarket differential covers

Limited Lifetime Warranty

Features:

Made from high quality 1.

50 inch x .

250 wall DOM

Retains factory track bar mounting bolts & hardware

Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance

Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of track bar length without removing control arm mounting bolt

Features Synergy Dual Durometer Bushings (DDB) with Teflon® bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality

100% bolt on components assures an easy, trouble free installation with the use of basic hand tools

Notes:

Compatible from 0-4 inches of lift in the stock mounting locations with no bump stop spacing required.

Front track bar relocation bracket and high steer are recommended for lifts 3 inches and over and require 3 inches of bump stop spacing

The replacement adjustable joint is 4812-01 and the replacement bushings are 4327-01

Min/max lengths: 33.

75 / 34.

50 inches