2016-2019 Cadillac ATS-V Pre-Programmed Smart TPMS Tire Pressure Sensors Kit

This Smart Sensor kit replaces the tire pressure sensors on the 2016-2019 Cadillac ATS-V, coupe or sedan. The sensors come pre-programmed for the ATS's 315 MHz GM system, so they are ready to mount and learn to the car.

ATS-V owners replace sensors more often than most, because these cars see track days, staggered tire swaps and second sets of wheels for winter or the track. Every set of wheels needs its own sensors to keep the tire pressure readout working, and sensors also get damaged when performance tires are mounted on low profile wheels. These Smart One sensors fit the factory location and report to the ATS-V's cluster like the originals.

They meet SAE J1205 and J1206 test standards for heat, cold and corrosion, and the tire has to be dismounted to install them.

Relearn on the ATS-V

The ATS-V uses GM's standard relearn. Start the tire learn mode from the driver information center, or hold the lock and unlock buttons on the key fob until the horn chirps twice. Then wake each sensor with a TPMS tool in order: left front, right front, right rear, left rear. The horn chirps after each one is learned. A scan tool can also run the relearn.

Common questions

Will these fit a regular ATS? The standard ATS uses the same 315 MHz GM system. If you have a non-V ATS, put your VIN in the order notes and we will confirm fitment before it ships.

Do I need these for my track wheels? If you want the tire pressure readout and no warning light on the second set, yes. Each set of wheels needs its own sensors.

Can a tire shop do the relearn? Yes. Any shop with a TPMS tool can do it in a few minutes during the tire install.

Fitment: 2016, 2017, 2018, 2019 Cadillac ATS-V coupe and sedan