2015-2020 Toyota Tacoma Pre-Programmed Smart TPMS Tire Pressure Sensors Kit

This Smart Sensor kit replaces the tire pressure sensors on a 2015-2020 Toyota Tacoma. The sensors come pre-programmed for the Tacoma's 315 MHz Toyota system, so the only steps left after mounting are registering the sensor IDs to the truck.

Tacoma owners tend to need sensors when they change wheels. Upgrading to TRD style or aftermarket wheels for bigger all terrain tires means the factory sensors either move over or new ones go in, and many owners keep a second set of wheels for off road use or winter. A dead sensor battery is the other common cause, since the factory sensors are sealed units. These Smart One sensors fit the factory location and report to the Tacoma's TPMS system like the originals.

They are tested to SAE J1205 and J1206 standards for temperature extremes and corrosion. The tire has to be dismounted to install them.

Registering the sensors to a Tacoma

Toyota does not let the Tacoma learn new sensors by driving, and the SET button only resets the pressure baseline. The new sensor IDs have to be written to the truck through the diagnostic port with Toyota Techstream or an aftermarket TPMS tool that supports Toyota ID registration. Most tire shops with a TPMS tool can do it during the install. After the IDs are registered, set the tires to the door placard pressure and use the SET button to store the baseline.

2015 trucks

The 2015 Tacoma was the last year of the previous generation, and its factory sensor is different from the 2016 and newer trucks. If you have a 2015, put your VIN in the order notes and we will confirm the kit before it ships.

Common questions

Can I use the SET button to learn these? No. The SET button only stores the current pressures. The sensor IDs must be registered with a scan tool first.

Will these fit TRD Off Road and TRD Pro wheels? Yes, they install in any Tacoma wheel drilled for a TPMS valve stem.

Fitment: 2015, 2016, 2017, 2018, 2019, 2020 Toyota Tacoma