
The B&W GNRK1313 is the Turnoverball underbed gooseneck hitch for 2003-2009 Dodge Ram 2500 and 3500 trucks, plus diesel-only 2010-2012 Ram 2500/3500 and the 2013 Ram 2500 diesel. It puts a 2-5/16 inch gooseneck ball in the bed, rated at 30,000 lb towing and 7,500 lb vertical load, and lets you flip the ball upside down into the socket so the bed is flat when you are not towing.
The Turnoverball is the hitch most gooseneck owners end up with because it disappears when it is not in use. Pull the handle, lift the ball out, turn it over and drop it back in, and the bed floor has nothing more than a flush socket in it. The rest of the hitch lives under the bed, bolted to the frame with model specific side plates and crossmembers, so the load goes into the truck's frame instead of the bed sheet metal.
Installation is bolt-in with no welding. A 4 inch hole is cut in the bed for the ball socket, and the center section slides over the exhaust. The kit also needs a small notch in the passenger side bed flange, and on some trucks the fender liner needs trimming. The release handle sits on the driver side, and the safety chain U-bolts mount through the center section, which takes four drilled holes in the bed. Removing the spare tire makes the job easier but is optional.
What's included
B&W builds the GNRK1313 in the USA and backs it with a limited lifetime warranty. It ships in two boxes, about 68 lb and 42 lb.
Common questions
Does it fit my 2011 Ram 2500 with the gas Hemi? No. For 2010-2012 trucks, B&W lists this kit for diesel models only.
Will it fit a short bed? Yes. It fits both the short bed and long bed on the listed trucks.
Can I tow over 30,000 lb with it? No. 30,000 lb is the hitch rating, and your actual limit is the lowest of the hitch, the truck and the trailer coupler ratings.