
The B&W RVK3500 is the Companion 5th wheel hitch for trucks that already have a B&W Turnoverball gooseneck hitch. Remove the gooseneck ball, drop the Companion into the Turnoverball socket, and the truck is ready to pull a 5th wheel trailer, rated at 20,000 lb towing and 5,000 lb pin weight. No rails, no extra holes in the bed.
A lot of owners install a Turnoverball for a gooseneck trailer and later buy a 5th wheel camper. Instead of adding a second hitch with bed rails, the Companion uses the Turnoverball's center socket as its single mounting point. It locks in with the same socket that holds the ball, and when you take it out, the bed is back to a flat floor with the gooseneck ball ready to go in.
The head is fully articulating, so it moves with the trailer over uneven ground instead of binding, and wrap-around jaws about an inch thick close completely around the kingpin for a tight, quiet connection. Height adjusts to 16-1/4, 17-1/4 or 18-1/4 inches across nine pivot arm positions, so the trailer can be set level behind most trucks.
Key specs
Important fitment note
The RVK3500 only fits trucks with a B&W Turnoverball gooseneck hitch installed. Trucks with a factory puck system from Ford, GM or Ram need B&W's Companion OEM puck system hitches instead, and B&W's warranty does not cover the RVK3500 on any mount other than a Turnoverball.
Common questions
Is the Companion a slider? No. It is a fixed position hitch. Short bed owners should check cab clearance with their trailer before buying.
Can I switch back to a gooseneck? Yes. Pull the Companion out of the socket and drop the Turnoverball back in.
How heavy is it to lift out? The hitch weighs over 100 lb, so plan on two people to lift it in and out.