
The B&W GNRK1320 is the Turnoverball underbed gooseneck hitch for 2019 and newer Ram 2500 and 3500 trucks that were built without the factory 5th wheel and gooseneck puck prep. It adds a 2-5/16 inch gooseneck ball rated at 30,000 lb towing and 7,500 lb vertical load, and the ball flips over and stores in the socket so the bed stays flat.
Plenty of 2019 and newer Rams left the factory without the puck system. The GNRK1320 gives those trucks a frame mounted gooseneck without retrofitting the factory pucks. The hitch bolts under the bed to the frame, and only the ball socket shows through the bed floor. When you are not towing, pull the handle, flip the ball upside down into the socket, and the bed is clear for cargo.
Installation is bolt-in. A 3-1/2 inch hole is cut in the bed for the socket, and four 11/16 inch holes are drilled for the safety chain U-bolts. The exhaust is dropped from its hanger to make room while the center section goes in. The release handle is on the driver side over the axle, reached from inside the rear wheel well. Removing the spare tire and heat shield is optional but makes access easier. For 2021 and newer trucks, B&W supplies an updated hole template, so use the template that matches your model year.
What's included
B&W makes the GNRK1320 in the USA and covers it with a limited lifetime warranty.
Common questions
My Ram has the factory puck system. Is this the right hitch? No. This kit is for trucks without puck prep. Trucks with the factory pucks use B&W's puck system gooseneck and 5th wheel hitches instead.
Does it fit both bed lengths? Yes. It fits the 6 foot 4 inch and 8 foot beds.
Can I tow more than 30,000 lb? B&W offers a 3 inch ball, part GNXA2025, for loads above 30,000 lb, within the truck's own ratings.