The OE Wheels VW18 is an 18x8 inch gloss silver replica wheel with a 5x112 bolt pattern, +45 mm offset and a 57.1 mm center bore, made to bolt onto most Volkswagen and many older Audi models without spacers or hub rings. It is a single wheel, so you can replace one damaged rim or buy a full set.
Curb rash and bent rims are the most common reason VW and Audi owners shop for a single wheel, and a dealer replacement can cost several times more. The VW18 matches the factory 5x112 pattern and 57.1 mm hub bore used on the Jetta, Golf, GTI, Passat, Tiguan and most of their platform mates, so it centers on the hub the same way the original does. The +45 offset keeps the tire in the stock position, so it fills the wheel well without rubbing on the strut or the fender lip.
Each wheel is load rated at 1,600 lb, which is well above what a VW sedan or crossover puts on a single corner. The finish is gloss silver, and a center cap is included. Factory center caps also fit if you want to keep the original badge.
Specs
Before you order
Check your hub bore. Newer Audi models, including the A4 from 2009 on, the A6 from 2012 on and the A8 from 2011 on, use a 66.5 mm hub that this 57.1 mm bore will not fit. Lug bolts and TPMS sensors are not included. Most owners move their factory TPMS sensors over when the tire is mounted. If you are mixing this wheel with factory wheels on the same axle, match the tire size so both sides roll the same diameter.
Common questions
Will this fit my 2019 Jetta? Yes. The 2005 and newer Jetta uses 5x112 with a 57.1 mm hub, which is what this wheel is built for.
Is this sold as one wheel or a set? One wheel. Order the quantity you need.
What tire size goes on an 18x8 wheel? The common factory sizes for 18 inch VW wheels, such as 225/40R18 and 235/45R18, mount on this 8 inch width without trouble.